Perforated Belts - This procedure is performed so that belts have air suction to prevent the conveyed material from moving around; it is also carried out to allow cooling air to pass through.  Shown below are 2 examples of belt perforation.  Perforations can also be executed according to the customer's specifications.                                                                                                                                 

 

 

 

Overlap Profiles - These are applied with a special procedure on PVC belts used to convey fruit.  The special configuration of the profile deadens the impact of the conveyed product and prevents it from becoming bruised.  The flexure of the profile on the belt during winding on the roller allows the use of drums with smaller diameters.

 

 

 

 

Finger Profiles - These are applied with a special procedure on PVC-W belts used in the fruit and vegetable industry on grading and sorting plants.  They are made with a special compound resistant to low temperatures.  The finger "height" is either 100mm or 130mm.  With the 130mm size the fingers are jointed by a reinforcement which limits the flexure caused by the weight of the products.

 

 

 

 

 

 

                                                                                         

                                                                                                                                    Conveyor Curves         Back

 

 

[ Home ] [ Products ] [ Quality & Service ] [ News ] [ Download ] [ Contact ] [ Worldwide ] [ Site Map ] [ Coated Fabrics Division ]