Conveyor curves allow the solving of logistic problems through the deviation of the conveying system from a few degrees to a 180 degree turn.  Their main features are a constant flow of the material being transported and a remarkable space saving.  The standard angles are 45, 90 and 180 degrees, but it is also possible to supply any other angle with no limitation in the shape of rollers (tapered end rollers or knife edges) for the continuous transfer of items throughout the system avoiding instability problems and the use of connection plates or rollers.  The belt conveyance surface can be PUR, PVC or rubber according to the application it is meant for: chemical, foodstuffs, graphics and cartons, wood and brick industry; mail automation, material handling, airports etc.

 

 

 

 

 

 

 

 

Standard Production Program

 

 

 

 

 

 

 

Inside Radius (ri) [mm] 300 500 700 1000      
Belt Working Width (lu) [mm] 300 400 500 600 700 800 1000
For non standard sizes please get in touch with CHIORINO S.p.A technical office.

 

Technical Data necessary for making a curve:

Bend angle in degrees (α)        Running Direction    Inside Radius (ri) Speed    Belt working width (lu)    Height from the ground    Type and weight of the conveyed material        Possibility to reverse direction

 

 

 

 

                                                                                             

                                                                                                                                              Guides             Back

 

 

[ Home ] [ Products ] [ Quality & Service ] [ News ] [ Download ] [ Contact ] [ Worldwide ] [ Site Map ] [ Coated Fabrics Division ]